Home›Products›Wire Rope Tester

Wire rope condition monitoring

Inspect the rope. Without taking it out of service.

LRM-XXI magnetic diagnostic systems evaluate metallic cross-section loss and localized flaws in round ropes, flat ropes and steel-cord structures.

LMALocalized flawsPermanent magnetsCondition monitoring
LRM wire rope testing system
Product portfolioWire Rope Tester
Rope diameter3–270 mmHead dependent
Recorder10 kmStored test length

Wire rope condition monitoring

Two magnetic signals for one rope condition picture.

Permanent magnets saturate the rope while sensors track Loss of Metallic Area (LMA) and Local Flaw (LF) responses.

The system supports round and flat ropes, conveyor-belt steel cords and other elongated ferromagnetic structures with portable recording and analysis.

Magnetize

Permanent field
Rope saturation

Trend

LMA
Wear & corrosion

Locate

LF
Broken wires & local defects

Record

Portable logger
Position-linked diagnostics

Product range

Choose the configuration around the inspection.

Explore the principal configurations from the original NDT Technologies product portfolio. Final system selection is based on geometry, material, inspection objective and production workflow.

Wire rope magnetic diagnostic systemSystem

Magnetic rope diagnostics

LMA + LF inspection

Complete wire-rope diagnostic workflow combining magnetic head, position reference, recorder and analysis.

SignalsLMA + LF
Speed0.1–5 m/s
  • Loss-of-area trending
  • Localized flaw detection
  • Position-linked recorded traces
Discuss this configuration →

Selection logic

Start with the application, not the catalogue number.

The correct configuration follows from the component, target discontinuity or measurement objective, working environment and required data output.

Build the requirement →
  1. 01
    Rope type

    Identify round, flat, belt or steel-cord structure.

  2. 02
    Diameter

    Select measuring head for rope envelope.

  3. 03
    Inspection speed

    Confirm motion speed and encoder arrangement.

  4. 04
    Acceptance

    Define LMA / LF reporting and trending criteria.

Where the range fits

Designed around real inspection environments.

The product family can be configured around field, laboratory, workshop or automated production needs.

Cranes & hoists

Condition assessment of load-bearing wire ropes.

Mining & elevators

Periodic rope integrity monitoring.

Cableways

Trend metallic loss and local broken wires.

Conveyor belts

Inspect embedded steel-cord reinforcement.

Technical resources

Go deeper into the product data.

Open the original NDT Technologies source material and available product literature, or ask our team for the current technical data required for your application.