Home > Inspection Services > Internal UT Inspection
Ultrasonic Thickness Corrosion Mapping (UTCM)

UTCM testing is based on ultra sound immersion technique using normal beam (longitudinal wave). This technique is defined for the inspection of tubes from the ID side for the thickness loss in the form of corrosion mapping.
Other Services
Bare & Insulated Piping Inspection
Boiler Water Wall Inspection
Internal Ultrasonic Inspection
Leak Detection System
Remote Visual Inspection System
Tank Floor Scanning
Tubular Inspection
Utility Services
Key Features & Technical Advantages
  • 100% inspection of tubes, if compared to any other conventional inspection technique.
  • Inspection speed is 6 inch per second.
  • 10% wall loss of the tube thickness can be detected.
  • As the technique is immersion testing, clean and uniform flow of water has to be maintained.
  • Tube should be flooded throughout the inspection, to avoid the loss of data.
  • Real time Inspection in the form of A & B-scan image and % wall loss obtained.
 


Miles Ahead Technology....
Smiles Ahead Service.... 		Products Contact Us
News and Recent Updates
Inspection Services Head Office :
Projects Division Plot No. - 11, Sector - 23,
Service Support Turbhe, Navi Mumbai – 400 703
Copyright © 2017 NDT Technologies (P) Limited   India.
  Tel : +91 22 27839665 / 1463
  +91 22 27830789
  Fax : +91 22 27830030
  Email : sales@ndttechnologies.com
  inspection@ndttechnologies.com